REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Clarus (1995 issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Clarus
		Maintenance
		Engines FE DOHC and DOHC T8
		Greasing system
			Technical data
			Check engine oil level
			Check engine oil pressure
			Replacing the engine oil
			Changing the oil filter
			Oil radiator
			Sump
			Oil pump
			Troubleshooting
		Cooling
		The power supply system and release
		Fuel system
		Ignition system
		Coupling
		Manual transmission
		ACP G4A-EL
		AKP 50-40 LE
		Axes and power shafts
		Steering
		Wheels and tires
		Suspension
		Body
		The air conditioning system
		Electrical equipment
		Brakes
		Electric schemes

Changing the oil filter

PERFORMANCE ORDER

	1. Special wrench, remove the oil filter. If the rubber sealing ring of the oil filter is left on the cylinder block, remove it.
2. Clean the mating surface of the engine with a clean cloth.
3. Apply a thin layer of engine oil rubber sealing ring of the new oil filter.
A warning Be careful: the filter and the engine is very hot.
4. Replace the oil filter to a contact of the O-ring of the oil filter to the engine block and tighten the filter on 11/6 turnover.
5. Start up the engine and check for leaks around the oil filter seal.
6. Turn off the engine and wait 5 minutes for draining oil in a pan. Check the engine oil level and, if necessary, finish it to norm. The capacity of the oil filter 0.20 liter

next page »
Oil radiator