REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Clarus (1995 issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Clarus
		Maintenance
		Engines FE DOHC and DOHC T8
		Greasing system
			Technical data
			Check engine oil level
			Check engine oil pressure
			Replacing the engine oil
			Changing the oil filter
			Oil radiator
			Sump
			Oil pump
			Troubleshooting
		Cooling
		The power supply system and release
		Fuel system
		Ignition system
		Coupling
		Manual transmission
		ACP G4A-EL
		AKP 50-40 LE
		Axes and power shafts
		Steering
		Wheels and tires
		Suspension
		Body
		The air conditioning system
		Electrical equipment
		Brakes
		Electric schemes

printable version

Sump

1 - a reception exhaust pipe and bracket;
2 - a corner plate;
3 - bottom cover clutch (engine FE);

4 - the oil pan;
5 - oil receiver;
6 - stiffener.

Withdrawal

PERFORMANCE ORDER

1. Disconnect the negative battery terminal.

2. Drain the oil from the engine.

3. Remove the screws and remove the bottom cover and side cover.

4. Turn out bolts and remove a reception exhaust pipe and bracket.

5. Remove the screws and remove the corner plate.

6. Unscrew the bolts and remove the bottom cover clutch (engine FE).

7. Remove the oil pan mounting bolts. Blade flat screwdriver inserted between the oil pan and cylinder stiffener, separate the oil pan from the engine block.

A warning

Do not insert a screwdriver between the cylinder block and oil pan, as this can damage the mating surfaces.

Separating the oil pan with a lever, not to bend it.

Cleaning the tray from the sealant does not damage or scratch the mounting surface.

8. Remove the oil pan.

A warning

If the oil pan is used repeatedly, remove any foreign material from the mating surfaces of oil pan and cylinder block.

9. Remove the screws and remove the oil receiver.

10. Remove the bolt and stiffener.

11. Install the oil pan is carried out in reverse order of removal.

« previos page
Oil radiator

next page »
Oil pump