REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Clarus (1995 issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Clarus
		Maintenance
		Engines FE DOHC and DOHC T8
		Greasing system
		Cooling
		The power supply system and release
		Fuel system
		Ignition system
		Coupling
		Manual transmission
		ACP G4A-EL
		AKP 50-40 LE
		Axes and power shafts
		Steering
		Wheels and tires
			Technical data
			General recommendations
			Recommendations about replacement of tires
			Checking the air pressure and condition of tires
			Runout
			Types and causes of wear of the tire tread
			Removal and installation of wheels
			Shift of wheels
			Wheel balancing
			Troubleshooting
		Suspension
		Body
		The air conditioning system
		Electrical equipment
		Brakes
		Electric schemes

printable version

Checking the air pressure and condition of tires

PERFORMANCE ORDER

1. Check tire pressure at least once a month and before every long trip, it does not forget to measure the air pressure in the spare wheel.
2. The reduced or increased air pressure in the tires reduces their lifespan and impairs driving characteristics.
3. Too low tire pressure leads to increased fuel consumption.
4. On cars establish only radial tires.
5. The radial tire cords are arranged at the lower path between the tire beads. The belt surrounds a thin and elastic skeleton and provides stability of the tire.
6. The camera is replaced with tubeless tires vulcanized inside layer with high air impermeability. The board of such tires should be mounted on a disk rim reliably and tightly. No camera in the tire reduces weight of a wheel and simplifies its installation on the rim of the disc.
7. The air pressure in the tires should always be checked when tires are cold. With increased air pressure in the tires should not be heated to release air from the tire. When a significant change vehicle load should be changed accordingly air pressure in the tires.
	8. To measure the tire pressure using a pressure gauge.
9. Check that there are no air leaks from the valve. Remove the cap from the valve. Coat the valve a little saliva. In the formation of the bubble tighten the valve cap back side.
A warning To tighten the valve only use a metal cap.
	10. Re-check valve. With further bubble formation and inability dovorachivaniya gate valve replace. Be sure to screw the cap.
	11. Check the tread depth. The depth of the tread: Standard tires: 1.6 mm Winter tires: 50% Tread
12. The tires must be replaced if they wear indicators are visible.
	13. The disc or the tire should be replaced in case of detection of cracks, damage, deformation or other defects.

« previos page
Recommendations about replacement of tires

next page »
Runout