1. Be careful when installing do not damage the inner wheel rim or the outer edge of the inner side surface of the tire footprint. |
2. A wire brush or emery paper clear all rust and / or dirt from the inside of the wheel rim. |
3. Clearing of aluminum wheel disks spend with use only a soft cloth. |
4. Remove from a tire protector all extraneous objects such as pebbles, broken glass, nails, etc. |
5. Check the installation of the gate. |
6. For tightness check use a soap solution. |
7. If tire replacement by an aluminum wheel disk using steel tools to avoid damaging the disk between the disk and the tool lay a rubber protective insert. Work is done on a rubber mat, not on a hard surface. |
8. Installation and repair of tires requires special tools and skills. These works may only be performed by professionals. |