add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Magentis / Optima (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks
Kia Magentis
Home
 
Kia
Magentis
Engines
Lubrication System
Cooling system
Technical data
Coolant
Checking the tightness of the cooling system
Check the radiator cap pressure
Checking coolant density
Radiator
Radiator Fan
The water pump of engine DOHC
Water Pump V6 engine
Thermostat SOHC engine
Thermostat V6 engine
Pipes and hoses, engine cooling
The control and toxicity
Fuel system
Ignition system
Coupling
Transmission
Power shafts, axles
Suspension
Steering
Brakes
Body
The air conditioning system
Electrical equipment
Electrical diagrams
 


Hit Counter by Digits


print page printable version

The water pump of engine DOHC



Withdrawal

PERFORMANCE ORDER

1. Drain the coolant hose and remove the drain connection of the radiator and the coolant bypass hose from the water pump.
2. Remove the drive belt and the water pump pulley.
3. Remove casings of a gear belt and belt tensioner.
4. Remove the bolts of the water pump and then remove the generator support.
5. Remove the water pump from the engine block.

Check

PERFORMANCE ORDER

1. Check each part for cracks, damage or wear and replace if necessary the pump assembly.
2. Turn the shaft of the water pump and check for smooth rotation in the absence of noise.
3. Check for leaks from the coolant pump.

4. If there is a leak from the hole A faulty seal of the pump. If necessary, replace the water pump.

Setting

PERFORMANCE ORDER

1. Remove any remnants of gaskets and foreign material sealing surface of the water pump.

2. Set the new O-ring into the groove at the front end of the pipe for the coolant, and then moisten the coolant sealing ring. Do not use oil or grease.

3. Replace the water pump new gasket, install the pump and secure it with screws.

Torque: 20-27 N ??? m

4. Install the timing belt tensioner and timing belt. Adjust the belt tension and set casings of a gear belt.
5. Install the water pump pulley and the drive belt, then adjust the belt tension.
6. Fill in the required amount of cooling required coolant.
7. Start up the engine and check for leaks from the cooling system.





« previos page
Radiator Fan
next page »
Water Pump V6 engine

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.