add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Magentis / Optima (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks
Kia Magentis
Home
 
Kia
Magentis
Engines
Lubrication System
Cooling system
The control and toxicity
Fuel system
Technical data
Multi-point fuel injection (MFI)
Verification system of injection MFI
The control lamp fault (MIL)
Diagnostic trouble codes
The coolant temperature sensor (ECT)
The gauge of absolute pressure in an inlet collector (MAF) with the IAT
Meter of air (MAF)
The temperature sensor of air entering the engine (IAT)
Throttle position (TP)
The modulator control the speed of the crankshaft of the engine idling
The heated oxygen sensor (HO2S)
Camshaft position sensor (CMP)
Sensor crank angle (CKP)
Fuel injectors
The solenoid valve system EVAP
Knock sensor
Potentiometer adjustment WITH idling (only for leaded petrol)
Sensor power steering (PSP) [2,0 liter DOHC]
:20. Throttle position (TP)
Replacing fuel level sensor (2.0 L DOHC)
Checking the fuel pump (2,0 l DOHC)
Checking channel clearing of the canister with the activated coal (2,0 l DOHC)
Check of the pressure created by the pump (2,0 l DOHC)
Replacement of the fuel filter (2,0 l DOHC)
Purification of the throttle device
Checking channel purification with charcoal canister (2.5L V6)
Replacing fuel level sensor (2.5L V6)
Checking fuel pump (2.5L V6)
Check of the pressure created by the pump (2.5L V6)
Replacement of the fuel filter (2.5L V6)
Adjusting the throttle position sensor (TP) (2,5 l V6)
The pedal and the accelerator cable
Fuel line
Fuel tubes and tubes of system EVAP
Fuel tank
PROCEDURE FOR TROUBLE
Troubleshooting
Ignition system
Coupling
Transmission
Power shafts, axles
Suspension
Steering
Brakes
Body
The air conditioning system
Electrical equipment
Electrical diagrams
 


Hit Counter by Digits


print page printable version

Checking channel clearing of the canister with the activated coal (2,0 l DOHC)



PERFORMANCE ORDER

Coolant temperature: 80-95 ?� C

1. Disconnect the vacuum hose from the solenoid valve treatment with activated charcoal canister and connect the vacuum gauge.

2. Start the engine and check that after the increase in engine speed, the vacuum is constantly increasing.

In the absence of vacuum may passage of the throttle device is contaminated and must be cleaned.





« previos page
Checking the fuel pump (2,0 l DOHC)
next page »
Check of the pressure created by the pump (2,0 l DOHC)

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.