1. Raise the vehicle. |
| 2. Special wrench, remove the oil filter. If the rubber sealing ring of the oil filter is left on the cylinder block, remove it. |
3. Apply a thin layer of engine oil rubber sealing ring of the new oil filter. |
4. Replace the oil filter to a contact of the O-ring of the oil filter to the engine block. |
5. Tighten the filter 11/6 turnover. |
6. Start up the engine and check for oil leaks. |
7. Turn off the engine and wait 5 minutes for draining oil in a pan. Check the engine oil level and, if necessary, finish it to norm. The capacity of the oil filter: 0.2 l |