REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Sephia / Shuma (1995 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Sephia / Shuma
		Maintenance
		Engine
		Greasing system
		Cooling
		The power supply system and release
		Fuel system
		Ignition system
		Coupling
		Manual transmission
		Automatic Transmission
		Axes and power shafts
		Steering
		Wheels and tires
		Brakes
		Suspension
		Body
		The air conditioning system
			Technical data
			Checking the compressor relay
			Check the air conditioner switch
			Check thermal contact conditioner
			Fan / evaporator
			Check the fan motor
			Check of the block of resistors of the fan motor
			Air conditioning compressor
			Check the fan switch
			C compressor drive belt
			Condenser
			Condenser Fan
			Check the condenser fan relay
			Block heater
			The control unit of heating and ventilation
		Electrical equipment

printable version

Air conditioning compressor

Withdrawal

PERFORMANCE ORDER

1. Discharge the air conditioning system.
2. Remove the bottom casing of the air conditioning compressor.
	3. Remove the air conditioning compressor, as shown in the figure. Immediately close all open apertures and tubes to eliminate moisture from the air in the air conditioning system.

Setting

PERFORMANCE ORDER

1. Install the air conditioning compressor is carried out in sequence, return to removal, taking into account the following:
- Pour fresh oil in the compressor;
- Before installing the sealing rings, oil them;
- Do not grease connecting nuts of unions of the air conditioning compressor;
- Tighten the inlet and outlet hoses, torque 24 - 31 N ??? m;
- Adjust the tension of the drive belt air conditioning compressor.

2. Install the lower cover air conditioning compressor.

3. Fill the refrigerant air conditioning system.

« previos page
Check of the block of resistors of the fan motor

next page »
Check the fan switch