REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Sephia / Shuma (1995 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Sephia / Shuma
		Maintenance
		Engine
		Greasing system
		Cooling
		The power supply system and release
		Fuel system
		Ignition system
		Coupling
		Manual transmission
		Automatic Transmission
		Axes and power shafts
		Steering
		Wheels and tires
		Brakes
		Suspension
		Body
		The air conditioning system
			Technical data
			Checking the compressor relay
			Check the air conditioner switch
			Check thermal contact conditioner
			Fan / evaporator
			Check the fan motor
			Check of the block of resistors of the fan motor
			Air conditioning compressor
			Check the fan switch
			C compressor drive belt
			Condenser
			Condenser Fan
			Check the condenser fan relay
			Block heater
			The control unit of heating and ventilation
		Electrical equipment

printable version

Condenser

Capacitor

1 - the capacitor;
2 - condenser fan;
3 - a cold tube ?��2;
4 - Receiver / dryer;

5 - cooler tube ?��1;
6 - suction pipe;
7 - Lang low pressure;
8 - Lang high pressure

Withdrawal

PERFORMANCE ORDER

1. Discharge the air conditioning system.
2. Remove the tube from the condenser.
	3. Remove the screws and remove the condenser.
A warning Insert the cardboard protection between the condenser and the radiator. Immediately close all open apertures and tubes to eliminate moisture from the air in the air conditioning system.

Setting

PERFORMANCE ORDER

Install the air conditioning compressor is carried out in reverse order of removal.

A warning

Fill with fresh oil to the compressor;

Before installing the sealing rings, oil them;

Do not grease connecting nuts of unions of the air conditioning compressor;

When installing a new condenser fill 20 ^cm3 of fresh oil to the compressor via the pressure line of the compressor.

Tightening torque nuts tubes: 9,8-19,6 N ??? m

« previos page
C compressor drive belt

next page »
Condenser Fan