REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Sephia / Shuma (1995 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Sephia / Shuma
		Maintenance
		Engine
		Greasing system
		Cooling
		The power supply system and release
		Fuel system
		Ignition system
		Coupling
		Manual transmission
		Automatic Transmission
		Axes and power shafts
		Steering
		Wheels and tires
		Brakes
		Suspension
		Body
		The air conditioning system
			Technical data
			Checking the compressor relay
			Check the air conditioner switch
			Check thermal contact conditioner
			Fan / evaporator
			Check the fan motor
			Check of the block of resistors of the fan motor
			Air conditioning compressor
			Check the fan switch
			C compressor drive belt
			Condenser
			Condenser Fan
			Check the condenser fan relay
			Block heater
			The control unit of heating and ventilation
		Electrical equipment

Check thermal contact conditioner

PERFORMANCE ORDER

1. Remove the glovebox.
2. Start up the engine and leave to work on frequency of rotation of idling.
3. Turn on the switch and set the air conditioner for a few minutes, switch the fan to the highest speed.
4. Turn off the fan and stop the engine.
5. Disconnect the thermal cut-conditioner.
	6. Additional wires connect the positive terminal of the battery to pin 1 and the negative terminal - to terminal 4 of the connector. Voltmeter, measure the voltage at the terminals 3 and 4 of the connector. At a temperature of about 4 ?� C, the voltage should be equal to 12, and at a temperature below 1 ?� C, the voltage should be 0 V.
7. Otherwise, replace the thermo unit.