REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Sephia / Shuma (1995 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Sephia / Shuma
		Maintenance
		Engine
		Greasing system
		Cooling
		The power supply system and release
		Fuel system
		Ignition system
		Coupling
		Manual transmission
		Automatic Transmission
		Axes and power shafts
			Technical data
			Checking the bearing play of the front wheels
			Checking the status of the drive shaft
			A rotary fist and a nave of a forward wheel
			Rear axle
			Drive shaft
			Repair knuckle
			SHRUS type Tripoid
		Steering
		Wheels and tires
		Brakes
		Suspension
		Body
		The air conditioning system
		Electrical equipment

Checking the bearing play of the front wheels

PERFORMANCE ORDER

1. Lift the car and fix on support.
2. Remove the four wheel nuts.
3. Remove the wheel.
4. Peel back the fillet and turn away a nut of fastening of a power shaft to a nave and remove the two screws on the brake disc.
5. Remove the caliper and the brake disk.
	6. Establish a measuring tip of a dial indicator on the end of the hub of the front wheel and, moving along the axis of the hub, measure bearing play. Maximum permissible backlash: 0,05 mm
7. Install the caliper and the brake disk.
8. Tighten the nut with flange mounting of the drive shaft and the two screws on the brake disc. Torque: Nut with collar: 210-279 N ??? m Bolts: 9,8-15 N ??? m
9. Install the wheel.
10. Tighten the wheel nuts. Torque: 88-118 N ??? m
11. Lower the car.

« previos page
Technical data