REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Spectra (2004 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Spectra
		Device Car
		Operating Guidelines
		Faults in the way
		Maintenance
		Engine
			Design Features
			Possible engine malfunction, their causes and remedies
			Useful tips
			Compression check in cylinders
			Removal and installation of decorative engine cover
			Removal and installation of mudguards of the engine
			Mount Replacement power unit
			Replacement of a protective timber
			Installation of the piston of the first cylinder to TDC of the compression stroke
			Replacing the timing belt
			Replacing the support rollers and tensioning the timing belt
			Removing, Troubleshooting and installation of a flywheel
			Replacement parts Seal Engine
			The cylinder head of the engine
			Removing and installing engine
			Lubrication system
			Engine cooling system
			Exhaust System Engine
			The power supply system of the engine
		Transmission
		Chassis
		A steering
		The brake system
		Electrical
		Body
		Car Care
		Purchase of spare parts
		A trip to the STO
		Winter car operation
		Preparation for technical inspection
		Applications
		Diagrams

printable version

Replacing the support rollers and tensioning the timing belt

If you hear noise from the timing belt, it is likely that faulty bearing tensioning or support roller. Remove the clip and check the performance of his bearing. If you felt when turning the bearing seizure, end play or traces of grease leaking from the bearing, replace the rollers.

You will need a key "14".

1. To replace the tensioner as ka remove the top cover and average the timing belt and tensioner pulley pressure spring (see. "Replacing the belt drive of the mechanism").


2. Remove the bolt tension roller ...	3. ... and remove the tension roller with his arm.

4. Set the tension roller in reverse order of removal.

Replacing the support rollers and tensioning the timing belt

5. To replace the support roller loosen the tension roller ...


6. ... remove the bolt support roller ...	7. ... and remove the bearing roller.

8. Place the bearing roller, as well as all previously removed parts in reverse order of removal.

« previos page
Replacing the timing belt

next page »
Removing, Troubleshooting and installation of a flywheel