REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Spectra (2004 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Spectra
		Device Car
		Operating Guidelines
		Faults in the way
		Maintenance
		Engine
			Design Features
			Possible engine malfunction, their causes and remedies
			Useful tips
			Compression check in cylinders
			Removal and installation of decorative engine cover
			Removal and installation of mudguards of the engine
			Mount Replacement power unit
			Replacement of a protective timber
			Installation of the piston of the first cylinder to TDC of the compression stroke
			Replacing the timing belt
			Replacing the support rollers and tensioning the timing belt
			Removing, Troubleshooting and installation of a flywheel
			Replacement parts Seal Engine
			The cylinder head of the engine
			Removing and installing engine
			Lubrication system
			Engine cooling system
			Exhaust System Engine
			The power supply system of the engine
		Transmission
		Chassis
		A steering
		The brake system
		Electrical
		Body
		Car Care
		Purchase of spare parts
		A trip to the STO
		Winter car operation
		Preparation for technical inspection
		Applications
		Diagrams

printable version

Replacing the timing belt

You will need: a flat-blade screwdriver, socket wrench "10" keys "10", "14", "21" pliers.

1. Disconnect a wire from the plug ?�-?� the storage battery.

2. Remove the decorative motor cover (see. "Removing and installing decorative casing of the engine").

3. Establish the piston of 1st cylinder TDC compression stroke (see. "Installation of the piston of the first cylinder to TDC of the compression stroke").

4. Remove the two upper bolts cover the timing belt, remove the bracket decorative casing, remove the screw dipstick bracket and remove the bracket.

NOTE

Right upper mounting bolt of the timing belt cover mounted terminals for the "masses" of the engine.

5. Remove the two bottom bolts of the top cover of the timing belt, and remove the cover.

NOTE

To replace the timing belt, remove the belt drive of the generator and the power steering pump (see. "Replacing the alternator drive belt and a water pump", "Replacing the drive belt power steering pump and air conditioning compressor").


6. Secure the water pump pulley from turning, remove the three bolts of its fastening ...	7. ... and remove the pulley.


8. Remove the bolt cover middle timing belt ...	9. ... and remove the cover.


10. Fixing the crankshaft from turning, remove the pulley bolt drive additional units ...	11. ... and remove the pulley.


12. Remove the three screws on the bottom cover belt timing ...	13. ... and remove the cover.


14. Remove the spring tension roller.	15. Loosen the screws on the tension wheel ...


16. Take ... video ...	17. ... and remove the timing belt.

18. Install the timing belt and all previously removed parts in reverse order of removal.

19. When installing ensure the tension of the leading branches of the belt. After installation, adjust the belt tension (see. "Adjusting the tension of the timing belt").

« previos page
Installation of the piston of the first cylinder to TDC of the compression stroke

next page »
Replacing the support rollers and tensioning the timing belt