REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 626 (from 1991 to 1998, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mazda
	626
		Instructions
		Maintenance
		Engines
		Heating and ventilation
		Fuel system
		An exhaust system
		Transmissions
		Coupling and semiaxes
		The brake system
			Introduction
			Specifications
			Anti-lock braking system (ABS)
			Brake pads disc brakes
			Caliper
			Brake disk
			Brake pads drum brakes
			The wheel cylinder
			The main brake cylinder
			Brake tubes and hoses
			Bleeding brake system
			Servo
			Height and a free wheeling of a pedal brake
			Hand brake
			Cables handbrake
			The switch of an alarm bulb of low brake fluid level
		Chassis
		Body
		Electrical
		Wiring
		Tips and Tricks

The switch of an alarm bulb of low brake fluid level

Check

PERFORMANCE ORDER


1. Check that the float switch is raised when the circuit is opened and closed the circuit when the float is lowered.
2. Replace the switch if it is defective.

Replacement

PERFORMANCE ORDER

1. Disconnect the connection of the switch.

2. Drain the brake fluid reservoir. Remove the retaining screw and replace the tank with a switch.

3. Installation is spent upside-down removals.

next page »
Chassis