 printable version
Removing and installing clutch slave cylinder
Details of the drive clutch
Removing and installing clutch slave cylinder
Withdrawal
| - Put the car on a lift.
- Remove the slave cylinder supply hose.
- Stop the fitting hole of the working cylinder and the hose.
- Remove the bolts from the slave cylinder to the transmission.
- Remove the slave cylinder, remove the plunger and the gasket.
|
|
Setting
Installation of the clutch slave cylinder
Installation of the working cylinder is made in reverse order, with the following: | - Place the gasket groove in the side of the gearbox.
- Insert the plunger into the base plate of the clutch fork.
- After attaching the hose to the slave cylinder bleed the clutch and check clutch pedal all the way.
|
|
| 
