add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz M-Class (W163, 1997 issue)

general info. full specifications. diagnostics. hints. tips. tricks
Mercedes-Benz W163
Home
 
Mercedes-Benz
W163
Introduction
Controls and receptions of safe operation
Current care and maintenance
Engine
System of cooling, heating and air conditioner
The power supply system and exhaust
Systems of an electric motor
Manual box of a gear change
The transmission automatically processed
Transmission Line
Brakes and auxiliary systems
Suspension and steering
Body
Outdoor equipment and body parts
Removing and installing wiper arms
Removing the drive front wipers
Removing and installing retractable telescopic nozzle headlight wipers
Removal, installation and adjustment of the hood
Replace the bonnet hinge
Removal and installation of the emblem Mercedes
Removal, installation and maintenance of components bonnet
Removal and installation of a gas-filled stop fixing the hood in the open position
Removal and installation of washer fluid reservoir
Removing and installing front bumper
Removing and installing the front upper crossmember frame
Removing and installing panels to protect the lower engine compartment
Removing and installing rear bumper
Removal and installation of the external spare wheel (at a corresponding complete set)
Removing and installing lockers protect wheel arches
Removal and installation of doors
Removal and installation of limiters opening side doors
Removing and installing tailgate hinges
Removal and installation of a gas-filled tailgate sliding stop
Removing and installing exterior door handles
Removal and installation of panels of an internal upholstery of door assemblies
Removing and installing door locks
Removing and installing door mirrors
Salon Equipment
Onboard electric
 


Hit Counter by Digits


print page printable version

Removal and installation of washer fluid reservoir



Details of installation of washer fluid reservoir on models equipped with headlight wipers

Details of installation of washer fluid reservoir on models without headlight wipers


PERFORMANCE ORDER

  1. Details of installation of washer fluid reservoir shown in the illustrations, which include all the links in the text.
  2. Remove the top crossbeam of the frame (see. Section Removal and installation of the front upper crossmember of the frame).
  3. Disconnect the wiring and hoses from pumps (5) supply of a washing liquid and - at the appropriate equipment - from the level sensor.
  4. Release of the lock (4) Hose (3) refrigerator path K / V.
  5. On models 163.128 (ML 400 CDI), remove the cover and the intermediate hose clamps securing the mounting fuse / relay box.
  6. Release coolant heat exchanger (10) of the lower number of plugs.
  7. With the help of an assistant, lift the cooler (10), unscrew the bolt (2), release of the landing plugs (6) washer fluid reservoir (1), take it inside and pull up, pull from the engine compartment.
  8. Installation is in the reverse order - track landing completeness of the tank (1) in the sleeve (6) and reliability snaps into the side lock.





« previos page
Removal and installation of a gas-filled stop fixing the hood in the open position
next page »
Removing and installing front bumper

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.