REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz C-Class (W203, 2000 issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mercedes-Benz
	W203
		Introduction
		Instruction Manual
		Routine maintenance
		Engine
		Cooling and heating
		The power supply system and release
		Electric motor
			Ignition and engine control
				Removing and installing ignition coils
				Checks control ignition and injection
				Troubleshooting - general information and preliminary checks
				Check and adjust the ignition timing
				Spark plug
			System of preheat of the diesel engine
			Diagnostics of systems of electronic control and diagnostic equipment
			Charge and start systems
		Manual gearbox
		Automatic Transmission
		Coupling and power shafts
		Brakes
		Suspension and steering
		Body
		Onboard electric

printable version

Removing and installing ignition coils

4-cylinder petrol engine

Removing ignition coils 6-cylinder petrol engine is described in Section Check and replacement of spark plugs. Checking the status of high-voltage wires.

Withdrawal

PERFORMANCE ORDER

1. Engine 111: Remove cover for ignition coils (1).

2. Engine 271: Remove the engine cover (1).

3. Disconnect the connector (2) of the ignition coil (3).

4. Remove the 2 bolts (4) of the ignition coil with a key Torx 8 mm.

5. Remove the ignition coil vertically. This disunite connector from the spark plug.

6. Similarly remove all ignition coils.

Setting

Installation is performed in reverse order of removal. Attach the ignition coil 9Nm moment.

« previos page
Ignition and engine control

next page »
Checks control ignition and injection