Removal and installation of facing in the cargo hold

1. Fold the rear seat forward and set it upright.
2. Remove the side rear seat cushion, unscrew the bolt at the same time under the seat and remove the pad from the holder.

3. Remove the cover with a screwdriver (1).

4. Remove the bolt (2) and remove the left eye baggage.
5. Remove and right eye baggage.
6. Remove the bottom cover (3) behind the rear seat.
7. Remove the stop screw (4) for the video. Remember his position: The video after the installation must conform to the right and left stop screw.
8. Remove the cover side opening.
9. Remove the 2 screws (5).
10. Disconnect the plug socket (6) and remove the side trim (7).

Installation is performed in reverse order of removal.