add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz G-Class (W463, 1999 issue)

general info. full specifications. diagnostics. hints. tips. tricks
Mercedes-Benz G-class
Home
 
Mercedes-Benz
G-class
Introduction
Controls and operation receptions
Current care and maintenance
Engine
System of cooling, heating, ventilation and air conditioning
The power supply system and exhaust
Systems of an electric motor
Automatic Transmission
Transmission Line
Brakes and auxiliary systems
Suspension and steering
Body
Onboard electric
general information
Mounting blocks and control modules
Switches
Drive motors, sensors
Signal & Lighting
System of additional safety (SRS)
Audio, navigation and mobile phone
Removal and installation of the radio.
Removing and installing CD-changer / TV-tuner
Removal and installation of antenna amplifiers
Removal and installation of antenna sites
Removal and installation of the antenna divider
Removal and installation of loudspeakers
Removing and installing transceiver system Handsfree mobile telephone
Removal and installation of mobile phone interface
Removal and installation of the cellular phone
Wiring
 


Hit Counter by Digits


print page printable version

Removal and installation of the radio.



Removal and installation of the radio.

Model codes ER5 ÷ ER7

Removing the radio is done using special keys - Model codes ER5 ÷ ER7

51 - Keys to retrieve the radio assembly

A2 - radio

This section discusses the model, equipped with audio systems MV ?�Classic?� / cassette "Standard" (code ER5), CF ?�Special?� / cassette medium (mid) Class (code ER6) and CF ?�Exquisit?� / cassette middle class "comfort" (code ER7).

Removal and installation of the radio (A2) is made with a special key (51). After connecting the lead in radio security code.

Models with 463,250 EF1 and EF2 codes

Removing the radio is done using a special key - the model with 463,250 EF1 and EF2 codes

3 - Connector D2B fiber optic cable
4 - wiring connector

A2 - radio

This section discusses 463,250 models equipped with audio systems such as Audio 10 RDS (code EF1) and Audio 10 RDS with the tray (code EF2).

PERFORMANCE ORDER

  1. Turn on the auxiliary battery and connect it to a standard battery, then disconnect the negative cable last.

    7 - Auxiliary battery
    8 - terminal positive wire module
    9 - negative terminal wire module
    W10 - Ground Battery

  1. Remove the trim panel sections of the dashboard console (see chap. Body).
  2. Remove the screws and release the radio assembly (A2) from the instrument panel.
  3. Gently, without bending and pulling, disconnect the connector D2B (3) fiber optic cables, - immediately stop the waveguides with special light-proof caps.
  4. Disconnect the connectors (4) wiring.
  5. Installation is in the reverse order.
  6. Finally, make the DTC reading and clearing of system memory on-board self-diagnostic scanner using STAR DIAGNOSIS (6511 1801 00) (see chap. Systems of an electric motor) and perform basic programming.





« previos page
Audio, navigation and mobile phone
next page »
Removing and installing CD-changer / TV-tuner

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.