REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Sunny (from 1991 to 1997, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Nissan
	Sunny
		Instructions
		Maintenance
		Engines
		Cooling
		Heating and ventilation system
		Fuel and exhaust system
		The system of the engine is started
		Coupling
		Transmissions
			Manual Transmission
			Automatic transmission
				Technical data
				Cable transmission control
				Selector
				Cable switching to a lower speed
				Gearbox speedometer
				Seals
				Double switch and reversing starter interlock
				Switch overload
		Axles
		Brakes
		Suspension and steering
		Body
		Electrical

Switch overload

Check

PERFORMANCE ORDER

1. Remove the center section of the front panel.
2. Disconnect the wires from the switch and overload warning lamp.
	3. Check the resistance between terminals 1 and 2. The off between these conclusions should be short-circuited.
4. Otherwise, replace switch.

Withdrawal

PERFORMANCE ORDER

1. Remove the center section of the front panel.

2. Disconnect from the switch and overload warning lamp.

3. Remove the screws, press the button and remove the selector lever.

4. Remove the switch from the latches.

Setting

PERFORMANCE ORDER

1. Install the switch.

2. Correct the wiring and put the handle.

3. Tighten the screws and check the fixation of the selector.

4. Attach the switch overload sockets and control lamps, set the central section.

next page »
Axles