 printable version
Emission control system (idle)
The valve of adjustment of speed of idling
| The valve of adjustment of speed of idling (arrow) is set based on the air filter housing. |
Check
| PERFORMANCE ORDER | | 1. Remove the air filter and the filter, through the instructions in Section 6.1.2, to gain access to the valve. | | 2. The operation of the valve can be checked with a thermometer and a hair dryer. Set the thermometer as close as possible to the valve, then gently heat it with a hair dryer. The valve must remain closed at temperatures up to 38 ?� C, begin to open at the 38 ?� C to 48 ?� C and is fully open at a temperature of 48 ?� C. Allow the valve to cool down and check that it is completely closed. | | 3. If the valve does not open at these temperatures or not locked, it must be replaced. |
|
Valve replacement Emission
| PERFORMANCE ORDER | | 1. Remove the air filter element, being guided by the instructions resulted in subsection 6.1.2. | | 2. Disconnect the hose from the bottom of the valve, then unscrew the screws and remove it from the air filter housing. | | 3. Installation is spent upside-down removals. |
|
|
