| 1. Drain part of the coolant. |
| 2. Follow the steps in the 1-6 subsection 6.2.12. |
| 3. Remove all items from the valve body. |
| 4. Disconnect all hoses from the manifold, pre-designating them. |
 | 5. Disconnect from the collector tube recirculation (arrow indicated nut fitting tube recycling). |
 | 6. Disconnect the connectors from the injectors and from the coolant temperature sensor, remove the wire connection with the mass (arrows indicate the screws that secure the terminal connections with a mass in the right side of the collector). |
| 7. Remove the rack manifold. |
| 8. Complete decompression of the fuel system, and disconnect the fuel hoses from the fuel distributor, immediately shut off the hoses. |
 | 9. Make sure that all the wires are disconnected and hoses, unscrew the nuts and bolts. operating in the reverse order. |
| 10. Remove the manifold and gasket. |
