| 1. Disconnect the battery from weight. |
| 2. Remove the rear bench seat (see. Subpart 13.23). |
| 3. Remove the screws, two screws and remove the inspection cover. |
| 4. Disconnect the sensor wiring connector and attach to the body with adhesive tape. |
| 5. Depressurize the fuel system, label, disconnect and plug the fuel lines at the top of the sensor. |
| 6. Mark the position of the sensor (if there is an arrow, it should face forward in the direction of the car). |
| 7. Remove the cap nut easy blows of the screwdriver resting on the nut slots. |
| 8. On the part of the vehicle to remove the sensor is necessary to unscrew the bolts. |
| 9. Carefully lift the sensor inside the tank, disconnect the pump from the bracket by pushing the bracket, and remove the sensor assembly from the pump. |
| 10. Remove the gasket. |
| 11. Disconnect the hose at the bottom of the pump and separate from the sensor. |
| 12. Wash the filter and inspect. When the filter is clogged or damaged, replace. |
