printable version
The combined switch and driving lights
Changing the beam on a distant trip Low and high beam Pointers right and left turns To turn the lights turn button at the end of the lever.
The first position: only the side lights, rear lights, number plate lighting and lighting of the instrument panel. The second point: the headlights are also included.
To enable the high beam, push the lever forward. To turn beam the lever in the opposite direction. To activate the indicator lights, set the lever further towards the rear.
The warning lamp on the instrument panel indicates that the main beam is turned on. The light signal can be switched on even if the headlight switch is not turned on.
To activate the blinking pointer, slide the switch lever up or down.
After driving on a curve in the flashing light pointer will automatically switch to its neutral position. However, when changing lane road you need to manually switch the alarm back to the starting position. About changing lane road, you can give a signal as follows: switch the flashing indicator is only slightly slide in the desired direction, and then hold his hand.
If the green light on the instrument panel flashes faster than normal, it indicates that the bulb is faulty front and rear flashers. If the warning light does not flash at all, obviously blown fuse or a warning lamp itself.
|