printable version

The ignition switch and the ignition switch

Ignition lock with anti-theft device

Carburetor engine

?�START?� - the starter. Before starting the engine control lever of an automatic transmission, set the "P" or ?�N?�, and in a manual transmission, set the idle position and hold the clutch pedal is pressed. Immediately after the engine starts, release the key. He returns to the position ?�ON?�. Starter includes not more than 15 seconds.

Position ?�ON?� - the engine and all consumers of electric power are included.

This is a common position of the switch to driving mode. Do not leave the key in position ?�ON?�, if the engine is not running. Otherwise, the battery is discharged and may be in violation of the ignition system.

Position "ACC" - electricity consumers, such as radio work, but the engine is off.

Position ?�LOCK?� - the steering wheel locked. The key can be pulled out only in this position.

To turn the ignition key from position "ACC" position ?�LOCK?� it must first push inside. When starting the engine seizes key positions in ?�LOCK?�, check whether the key is inserted fully. Then gently turn the key, turning the steering wheel back and forth. At the time when the vehicle is in motion, do not press a key, do not turn to position "ACC", do not pull, since all these actions are blocked by the wheel and make it impossible to operate the machine. If you want to turn off the engine while the vehicle is in motion is allowed only turn the key to position "ACC". In no case do not press the key and do not pull it.

Diesel engine

Position ?�ON?� to turn on incandescent spark plugs and engine warm-up. Once the engine starts, the key is returned to this position and all power consumers are in working order.

When the key is turned to position ?�ON?�, the indicator light flashes glow plug. The lamp goes out when the incandescent candle warmed up the engine to such an extent that he was wound up. This is a common position of the switch to driving mode. To prevent discharge of the battery should not leave the key in position ?�ON?�, if the engine is not running.

Position ?�START?� - the starter.

Before starting the engine, set the gear lever in the idle position, depress the clutch pedal. Immediately after started the engine, release the key. It is returned back to the position ?�ON?�. He let the starter to work more than 30 seconds.

Position "ACC" - energy consumers such as radio, in working condition, but the engine is off.

?�LOCK?� - the steering wheel locked. The key can be pulled out only in this position.