| 1. Remove the center section of the front panel. |
| 2. Lift the front of the car and establish on supports. |
| 3. Unhook the spring rod of inclusion of transfers. |
| 4. Loosen the nuts and remove the bolts axis of the rod and gearshift lever. |
| 5. Remove the stem from the bracket at the checkpoint, remove the nuts and remove the yoke from the bottom and remove the rod from the holder. |
| 6. Remove the bracket, remove the lever gearbox, remove the small cover at the base of the lever. |
| 7. If necessary, unscrew the nut, remove the box cover, remove the clamp and remove the cover. |
| 8. Check the condition of the parts, especially plugs axis and hinge rod, replace worn-out covers. |
