printable version
Check the crankshaft rotation sensor
1. Turn on self-test (Ch. 6) and check for faults in the fuel system. 2. Sensor Circuit Malfunction crankshaft rotation points 1 flash red and 1 green indicator (indicators are located on the processor unit). 3. Disconnect the connector from the sensor (photo) and switch on the ignition. 4. Check the voltage between terminal A and the ground (photo). 5. Turn off the ignition and check the circuit with an ohmmeter between the terminal D and weight (see photo). 6. If the voltage is present and the circuit to ground is OK, then contact the service center to check the processes weed block and wiring.
| 3.5 Application of the mark on the adjusting bolt |
| 5.3a Sensor connector on the engine rotation kol?�nvala K24 1. Connector |
|