printable version
Door glass and windows - removal and installation
1. Remove the inner door panel. 2. Rotate 90 ?� latches that secure the outer lining of the doors, lift and remove the trim. 3. Remove the plastic water filter. 4. Remove the chute window.
| 18.3 wicket and / m "Terrano I / Pathfinder" |
| 19.1a Unscrewing bolt seats |
| Details 19.1b separate front seat headrest 1. To remove the headrest loosen the cover facing the seatback 2. Regulator 3. Adjust the backrest tilt mechanism itself does not provide 4. 5. Wire tensioner Wire control regulation |
5. Remove the bolts from the glass to the window regulator. 6. Move the glass up and off. 7. If necessary, loosen the screws and remove the windows through the opening in the frame of the door (see photo). 8. Before assembly, lubricate the friction surfaces with a thin layer lithologic. 9. Installation is performed in reverse order. After installation, adjust the glass. To do this, first set the glass parallel to the upper trough, and then align it with the rear chute and tighten bolts. Ride Control is provided by rotating the glass front of the trough when released bolts.
|