 printable version
The throttle body (for systems with advanced injection systems TVi) removal and installation
Withdrawal 1. Complete decompression and disconnect the battery from weight. 2. Pour about 1 liter of fluid. 3. Remove the air filter. 4. Disconnect the traction throttle control cable cruise control valve and the cable (photo). 5. Disconnect the hose of the pressure regulator and the expander fast idling, remove the 4 nuts and cnimite housing with gasket.
| Location 10.22a units injection system with preliminary preparation of combustible mixture to the engine V6 1. Buck (wagon) 2. tank (truck) 3. Seat 4. Assistant 5. Exhaust pipe 6. The exhaust gas sensor to the absorber tank 7 Cl
|
| Location 10.22b units injection system with preliminary preparation of combustible mixture to the engine 1 4tsilindrovom. Seat assistant 2. Alarm relay 3. Details of the injection system: The sensor flow rate sensor rotation flap switch ho
|
| 1O.22b Details throttle body (up to 1989)
|
| 12.4a For removing the case disconnect these cables, hoses and connectors ...
|
Setting 6. Installation is performed in reverse order. Check the connection of cables, hoses and connectors. 7. Start the engine and check for leaks around fuel injectors. Check idle speed. Warm up the engine and add fluid.
| 13.2 Laying of wires and seal the nozzle 1. 2. Seal Gasket
|
| 13.4a Removing injector 1. The mandrel
|
| 12.4b ... and unscrew the 4 nuts
|
| 
