1. Disconnect the outlet hose 17 (see. Fig. The mechanism of the power steering) from the pump 26. |
2. Drain the hydraulic fluid into the container while turning the steering wheel from lock to lock, to remove as much liquid. |
3. Connect the outlet hose 17 to the pump 26. |
4. Pour the new fluid in the tank 22. |
5. Run the engine for 30 seconds several times. |
6. topping up, ensure that the tank does not remain empty. |
7. Leave the engine running at idle speed when the liquid level at the next engine start-stop change. |
8. Turn the steering wheel several times from lock to lock to the termination of the appearance of bubbles in the tank, thereby removing air from the system. A warning After switching on the engine level in the reservoir will rise slightly.
|