1. Secure the pulley and nut 6 (see. Fig. Details generator company Bosch). |
2. Remove the spring washer 7 and washer 8. |
3. Remove the pulley 9 to the rotor shaft. |
4. Remove the washer 10. |
5. Remove the fan 11. |
6. Remove the key 17 with the rotor shaft. |
7. Release the controller 18 voltage brush holder. |
8. To mark the relative position of the front cover and the body of the generator. |
9. Remove the screws 12. |
10. Remove the front cover 14. |
11. Unscrew the cover bolts 16. |
12. Remove the cover 16 of the bearing. |
13. Remove the bearing 15. |
14. Remove the seal. |
15. Remove the rotor 5 from the cover. |
16. Remove the screws of the rectifier unit. |
17. Remove the rectifier unit 2. |