printable version
Repair rusted apertures or holes in the bodywork
Remove the damaged surface of the paint. Using a wire brush, clean the crumbling rust from the surface of the bare metal of the damaged area. Process the damaged area the rust converter in accordance with the instructions printed on the packaging of the drug. Protect bore holes from rust or metal mesh or a strip of aluminum foil. Cut out the appropriate form of a piece of mesh holes, put it in the hole so that the edges do not protrude above the level of surrounding the opening of the panel. Secure it with a few lumps of putty paste the perimeter. A suitable tool align the ends of the mesh so that it fits snugly to the metal body. Then perform putty, painting and polishing of the damaged area of the body.
|