printable version
Tilt steering rods
The adjustment is made in the following order:
| Fig. 11.15. Installing the steering rod on the steering transmission: A - Set the rack in the middle position (A1 = A2); B - the size of the installation on the steering rod rack (B1 = 74 mm)
|
- Rack set in the middle of the steering gear housing, wherein the dimension between the end face of the crankcase and transmission of steering tie rod ball joint must be the same on both sides of the transmission and is 74 mm (Fig. 11.15); - To tighten the lock nut on the end of the rack; - Screw the tie rod on the rack so that the size of steering transfer between the projection and the ball joint was 74 mm; - Secure the tie rod locknuts.
|