printable version
Replacement lamps front indicators
Replace the front turn signal lamp using the following procedure:
| Fig. 357. The mounting of the front indicator lamp (arrow)
|
- Open the bonnet and remove the bolt (Fig. 357) securing the front indicator lamp (above the headlamp, near the wing); - Remove the turn signal in the direction of forward and disconnect the electrical connector; - Turn the bulb holder clockwise and remove it along with the body of the lamp Indicator; - Remove the bulb from the socket (bulb has a bayonet base); - Install a new lamp by turning, insert the cartridge into the body of the turn signal; - Connect the electrical connector and insert the turn indicator in the slot on the wing; - Gently tighten the bolt of the front indicator lamp. Bolt not overtighten, as it may explode glass.
|