Replacement lamps front indicators

Replace the front turn signal lamp using the following procedure:

- Open the bonnet and remove the bolt (Fig. 357) securing the front indicator lamp (above the headlamp, near the wing);

- Remove the turn signal in the direction of forward and disconnect the electrical connector;

- Turn the bulb holder clockwise and remove it along with the body of the lamp Indicator;

- Remove the bulb from the socket (bulb has a bayonet base);

- Install a new lamp by turning, insert the cartridge into the body of the turn signal;

- Connect the electrical connector and insert the turn indicator in the slot on the wing;

- Gently tighten the bolt of the front indicator lamp. Bolt not overtighten, as it may explode glass.