add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Sharan (from 1995 to 2000, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Volkswagen Sharan
Home
 
Volkswagen
Sharan
Introduction
VR6 engine
The two-liter engine (ADY)
Engine oil
Cooling
A fuel injection system VR6 engine
Precautions during repair work on the injection system
The principle of ECM under different conditions
Injection system
Fault injection system
Carrying out repairs and maintenance of injection
The accelerator cable
The electric fuel pump
Fuel filter
The fuel level sensor in the tank
Air filter
The system Simos injection 2.0-liter engine
The ignition system
Coupling
Manual 5-speed gearbox
The drive shafts
Power steering
Front suspension
Rear suspension
Brakes
Electrical
Diesel engine
The lubrication system of the diesel engine
The cooling system of the diesel engine
The power supply system of the diesel engine and turbocharger
Map service.
Applications
Wiring
 


Hit Counter by Digits


print page printable version

The fuel level sensor in the tank



The fuel level sensor includes a float and a potentiometer. With decreasing fuel level float drops, wherein the potentiometer associated with the float, increases the electrical resistance of the sensor. As a result the voltage falls and the fuel gauge needle moves in direction ?«leer?» (empty).

Details of the power system, located near the fuel tank
Fig. 206. Details of the power system, located near the fuel tank: 1 - a cover of the fuel tank; 2 - O-ring; 3 - retaining ring; 4 - the rubber seal; 5 - return valve; 6 - O-shaped sealing ring; 7 - vent; 8 - a pressure reducing valve; 9 - a return line; 10 - Union nut; 11 - plug connector, black, and pump fuel sensor; 12 - flange; 13 - supply fuel hose; 14 - a sealing ring; 15 - a returnable hose; 16 - non-return valve; 17 - bolt 10 Nm; 18 - filler neck; 19 - vent line; 20 - a sealing ring; 21 - safety ring; 22 - vent line; 23 - bolts 25 Nm; 24 - the fuel tank; 25 - Mount the fuel tank; 26 - bolts 20 Nm; 27 - cover / holder of the fuel filter; 28 - fuel (black); 29 - the fuel filter (observe the direction of the fuel); 30 - the gauge of level of fuel in the tank; 31 - the fuel pump; 32 - strainer





Removal of the sensor 30 (see. Fig. 206) the fuel level in the same way as the removal of the fuel pump, until such time until no flange 12. Then the pull arm from the fuel tank sensor by pressing its locking pawl.
When installing flange pay attention to its correct location.




« previos page
Fuel filter
next page »
Air filter

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.