|
|
 printable version
The inner door trim
Casing front door 1. Front door
2. Lock washer
3. Seal
4. silencers
5. Blind rivet nut
6. Boarding
7. Handle
8. Screw
9. Cover
10. Lock button
11. Socket | 12. Clip
13. Inner door drive
14. Glove box door
15. Cover
16. Phillips screws 4 Nm
17. Handle window
18. Lining
19. Phillips screws
20. Phillips screws
21. The intermediate pad |
Withdrawal
| PERFORMANCE ORDER | | 1. Lower the glass down. | | 2. Unscrew the top of the right and left cross-shaped screw (20) and the clip (12) - see. Fig. Casing front door. |  | 3. Push down the cover handle of the window (indicated by arrows) and remove it. | | 4. Unscrew the screw with a toothed washer on the overlay window handle, remove the handle of the window, along with the lining. Notice the position for reassembly. | | 5. Remove the handle (7). To do this, remove the cover (9) and unscrew the screw underneath (8) - see. Fig. Casing front door. |  | 6. Raise trim (1) together with the inner sealing box (2) and removed from the bearing bores. Thus it is necessary to apply a force. |
|
Setting
| PERFORMANCE ORDER | | 1. Before installing the casing in the set holes supporting intermediate pads 3 (see. Fig. | | 2. Install the trim panel in the reverse order of removal. | | 3. When installing the handle of the window to not forget the gasket. |  | 4. Set the pen on the axis so that the window is closed when it points upward forward approximately 25 ?� under (a) in the direction of movement of the machine. |
|
|
|
