REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Transporter, Caravelle (1990 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Volkswagen
	Transporter / Caravelle
		Instructions
		Engine
		Coupling
		Transmission
		Suspension
		A steering
		Brakes
		Wheels and tires
		Body
			Total information
			Bumper
			A forward closing beam
			Bonnet
			Backdoor
			Tailgate
			The front door
			Sliding door
				Removing and installing sliding doors
				Removal and installation of guide rail sliding door
			Rear double doors
			Radiator grille
			A protective lath license plate light
			Mirrors
			Front seat
			The middle row of seats of salon
			The rear banquette seating
			Glovebox
			Heating System
		Electrical

Removing and installing sliding doors

Withdrawal

PERFORMANCE ORDER

	1. Unscrew the cross-head screws (1) and remove the locking member (2) of the guide bar (the outside of the body).
	2. Unscrew the screw (2) inside the sliding door in the middle and remove the stop (1).
	3. Unscrew the screw (1) on the running board and remove the door stopper (2).
	4. Open until the end of the sliding door, thus removing the guide rollers of the guide bar (arrow).
	5. Lower the sliding door in front of so that you can remove the upper guide roller of the guide rail.
	6. With the help of others to move the door in the opposite direction so that the hinge headset (1) slipped from the guide rail (2).

Setting

PERFORMANCE ORDER

1. Installation is in the reverse order.

2. Tighten the screws to 20 Nm.

« previos page
Sliding door