add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volvo S40 / V40 (from 1996 to 2000, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Volvo S40 / V40
Home
 
Volvo
S40 / V40
General Information
Operation and maintenance of car
Design and specifications Engine
Engine repair
Transmission
Brakes
Front suspension and steering
Rear suspension
Engine Management System Fenix 5.1
Electric. Wiring and components
Introduction
Relay
Circuit breakers
The cable harness and control modules
General checks
Technical characteristics of the main elements of the electrical network
Technology substitution of elements of the electric equipment
Replacing the generator
Replacement starter
Replacing the oil pressure sensor
Replacement of external lighting
Replacement of lighting in the cabin
Replacing the interior light switches
Substitution beep
Replacing the wiper elements
Replacement switches
Removal of the electronic climate control system (ELP)
Replacing Cigarette Lighter
Replacement of blocks of the relay
Mechanical testing and regulation
Location of electrical components on the car and the circuit of the electrical connections
Body
Diagrams
 


Hit Counter by Digits


print page printable version

Replacing the interior light switches



Replacing the door switches
interior lighting

The procedure for replacing the door switches the interior lighting:

Location light switch in the cabin
Fig. 10.38. Location light switch in the cabin


1) Remove the retaining screw at the front (Fig. 10.38);
2) remove the switch out and disconnect the connector;
3) Assemble in the reverse order;
4) Check the operation.

Replacing light switch luggage

The procedure for replacing the light switch luggage:

Location luggage compartment light switch
Fig. 10.39. Location luggage compartment light switch


1) remove the tailgate trim in the cabin (Fig. 10.39);
2) disconnect draft from the lock (press the locking pin and remove the cravings);
3) Remove the three mounting bolts and remove the lock;
4) disconnect the connectors;
5) replace the lock assembly, put the rod;
6) reassemble in reverse order;




« previos page
Replacement of lighting in the cabin
next page »
Substitution beep

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.