add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Accent (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks
Hyundai Accent
Home
 
Hyundai
Accent
Instructions
Engine
Greasing system
Cooling
Control, reduced toxicity
Fuel system
Ignition system
Coupling
Transmission
Manual Transmission
Automatic transmission
Technical data
The control lamp fault (MIL)
Diagnostic trouble codes
Read fault codes
Check the transmission fluid pressure
Testing of teamwork of an automatic transmission and the engine for the motionless car (stall test)
Check the fluid level in automatic transmission
Check the operation of the selector lever
Adjustment of the switch indicate the position of the selector lever
Adjusting the servo compulsory inclusion downshift
Adjust the line pressure
Replacement of an oil sealing ring of a power shaft
Replacement of a cable drive speedometer
Removing and installing transmission
Repair Transmission
Lever
Control Cable
Repair of the selector lever
Axes and power shafts
Suspension
Steering
Brakes
Body
Air
Electrical equipment
Appendix
Wiring
 


Hit Counter by Digits


print page printable version

Adjusting the servo compulsory inclusion downshift



PERFORMANCE ORDER
1. Clean all dirt from the adjustment screw servo compulsory inclusion downshift.
2. Loosen the lock nut.
3. Twice loosen and tighten the adjustment screw tightening torque 5 N ??? m.
4. After tightening the adjustment screw tightening torque 5 N ??? m loosen it on 3-31 / 3 turns.
5. Tighten the lock nut torque.

Torque: 15-22 N ??? m


A warning

Before adjusting, apply sealant DC780na thread adjustment screw servo compulsory inclusion downshift.






« previos page
Adjustment of the switch indicate the position of the selector lever
next page »
Adjust the line pressure

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.