 printable version
A fuel highway and injectors
Engine 1.6 l Engines 1.8 / 2.0 L Withdrawal Check | - Disconnect the connector from the fuel injector and measure the resistance between the contacts of the connector. Resistance: 15,9 ?� 0,35 ohms at 20 ?� C.
 | - If the resistance is not correct, replace the fuel injector.
|
|
|
Setting | - Install the new injector O-rings.
 | - Lubricate the fuel injector O-rings.
|
- When installing nozzles rotate around their axes in one and the other side.
- Make sure the nozzles are firmly inserted in the fuel line.
 | If the nozzle is installed correctly, the O-ring may be trapped. Remove the nozzle and re-install it. |
|
|
|
