add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Elantra (from 2000 to 2004, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Hyundai Elantra
Home
 
Hyundai
Elantra
Gasoline engines 1.6, 1.8 and 2.0 liters
The diesel engine of 2.0 liters
Greasing system
Cooling
Fuel system
Control systems and emission control
Ignition system
The system of preliminary heating of the diesel engine
Coupling
Manual transmission
Automatic Transmission
Drive shafts, front and rear axles
Suspension
Steering
Brakes
Body
The air conditioning system
Technical data
Instructions for use of the refrigerant
Remarks at replacement of elements of the air conditioning system
Merging an air-conditioning system
Safety measures
Setting gauges for pressure measurement
Discharge the air conditioning system
The evacuation of air from the air conditioning system
Connecting the exhaust valve to the cylinder with the refrigerant
Charge air-conditioning system
Verification performance
Oil for air conditioning compressor
Check and adjust the tension of V-ribbed belts
Air conditioning compressor
Bushing clutch pulley and the air conditioning compressor
The excitation coil clutch
Checking clutch clearance
Blower, and relay
Receiver Drier
Triple Sensor (double) Pressure
Block heating and ventilation
Fan
Air filter
Damper actuator supply fresh / recirculated air
Check the fan motor
Relay test
Electrical equipment
Electrical diagrams
 


Hit Counter by Digits


print page printable version

Discharge the air conditioning system



PERFORMANCE ORDER

  1. Connect the air conditioning system pressure gauge.
  2. Place a towel under the open end of the central tube.
  3. Slowly open the high-pressure valve and discharge the air conditioning system.

With rapid discharge refrigerant from the air conditioning system, the system can flow compressor oil.

  1. Check whether there are oil stains on the towel. If so, gradually close the valve.
  2. After reducing the pressure in the air conditioning system is less than 3.5 kg / cm 2, open the low-pressure valve.
  1. Open the valves of high and low pressure and slowly reduce the pressure in the air conditioning system until the pressure gauge shows 0 kg / cm 2.




« previos page
Setting gauges for pressure measurement
next page »
The evacuation of air from the air conditioning system

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.