add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Elantra (from 2000 to 2004, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Hyundai Elantra
Home
 
Hyundai
Elantra
Gasoline engines 1.6, 1.8 and 2.0 liters
The diesel engine of 2.0 liters
Greasing system
Cooling
Fuel system
Control systems and emission control
Ignition system
The system of preliminary heating of the diesel engine
Coupling
Manual transmission
Automatic Transmission
Drive shafts, front and rear axles
Suspension
Steering
Brakes
Body
The air conditioning system
Technical data
Instructions for use of the refrigerant
Remarks at replacement of elements of the air conditioning system
Merging an air-conditioning system
Safety measures
Setting gauges for pressure measurement
Discharge the air conditioning system
The evacuation of air from the air conditioning system
Connecting the exhaust valve to the cylinder with the refrigerant
Charge air-conditioning system
Verification performance
Oil for air conditioning compressor
Check and adjust the tension of V-ribbed belts
Air conditioning compressor
Bushing clutch pulley and the air conditioning compressor
The excitation coil clutch
Checking clutch clearance
Blower, and relay
Receiver Drier
Triple Sensor (double) Pressure
Block heating and ventilation
Fan
Air filter
Damper actuator supply fresh / recirculated air
Check the fan motor
Relay test
Electrical equipment
Electrical diagrams
 


Hit Counter by Digits


print page printable version

Verification performance




PERFORMANCE ORDER

  1. Install the pressure gauge on the highway.
  2. Start the engine, leave work at engine speeds of 2000 min -1 and set the maximum cooling at high fan speed.
  3. Open all windows and doors.
  4. Install a thermometer in the air intake grille in the vehicle.
  1. Install the wet and dry bulb as close as possible to the inlet of the cooling unit.
  1. Check that the pressure indicated by the pressure gauge, is in the range 1,373-1,575 kPa. If the pressure is too high, add water to the condenser. If the pressure is too low, close the front side of the condenser.
  2. Check that the air temperature in the air intake grille in the interior of the vehicle is in the range 25-35 ?� C.
  3. According to the schedule, calculate the relative humidity by comparing the temperature of the wet and dry thermometers.
  4. Measure the temperature of the air intake grille in the interior of the vehicle and calculate the difference between the dry bulb and a thermometer in the air intake grille.
  1. Make sure that if the intersection of relative humidity and temperature differences are within the tolerance, then the air conditioning system is operating properly.




« previos page
Charge air-conditioning system
next page »
Oil for air conditioning compressor

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.