add to favorites

REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Santa FE (2006 release)

general info. full specifications. diagnostics. hints. tips. tricks

Hyundai Santa FE

Home

Hyundai
	Santa FE
		Operation and maintenance of car
		Engine
		Transmission
		Chassis
		Steering Gear
		Brakes
			Overview
				Checking and adjusting the brake pedal
				Check the operation of the brake servo without tester
				Removal of air from hydraulic brakes
				Removal, check and installation of the brake pedal
				Disassembly, inspection, assembly and installation of the main brake cylinder
				Pressure regulator rear brakes
				Removal, check and installation of the front brake pads
				Disassembly and assembly of front disc brakes
				Disassembly and assembly of rear disc brakes
				Removal, check and installation of the rear drum brakes
				Check and adjust handbrake lever stroke
				Anti-lock brakes
				Removal and installation of the electronic ABS control unit
				Checking the ABS hydraulic unit
				Removal and check wheel speed sensor (ABS)
				Check the operation of the ABS system
			Tables
		Onboard electric
		Body
		diagrams

Hit Counter by Digits

printable version

Removal and check wheel speed sensor (ABS)

Location wheel speed sensor ABS

Fig. 6.63. Location wheel speed sensor ABS

Withdrawal

Bolt sensor

Fig. 6.64. Bolt sensor

Remove the bolt wheel speed sensor (Fig. 6.64).

Connector wheel speed sensor

Fig. 6.65. Connector wheel speed sensor

Disconnect the connector wheel speed sensor and remove the sensor (Fig. 6.65).

Removing the speed sensor of the rear wheel

Remove the wheel.

Speed sensor rear wheel

Fig. 6.66. Speed sensor rear wheel

Disconnect the connector and remove the sensor (Fig. 6.66).

Check

Measuring the resistance between the sensor terminals

Fig. 6.67. Measuring the resistance between the sensor terminals

Measure the resistance between the sensor (Fig. 6.67).

Rated resistance:

- Speed sensor front wheel - 1100 ohms ?� 50%.

- Speed sensor rear wheels - 1100 ohms ?� 50%.

Measure resistance between sensor terminals while rotating the wheel

Fig. 6.68. Measure resistance between sensor terminals while rotating the wheel

When you rotate the wheel, measure the voltage between the terminals of the sensor (Fig. 6.68).

NOTE

Set the voltmeter to measure AC voltage (AC voltage).

Nominal value: recorded AC voltage.

« previos page
Checking the ABS hydraulic unit

next page »
Check the operation of the ABS system

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.