REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Clarus (1995 issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Clarus
		Maintenance
		Engines FE DOHC and DOHC T8
		Greasing system
		Cooling
		The power supply system and release
		Fuel system
		Ignition system
		Coupling
			Technical data
			Check the fluid level
			Adjust the clutch pedal
			The clutch pedal
			Bleeding the hydraulic clutch
			Clutch Master Cylinder
			Repair of the clutch master cylinder
			Clutch slave cylinder
			Repair of the working cylinder of coupling
			Clutch disc
			Troubleshooting
		Manual transmission
		ACP G4A-EL
		AKP 50-40 LE
		Axes and power shafts
		Steering
		Wheels and tires
		Suspension
		Body
		The air conditioning system
		Electrical equipment
		Brakes
		Electric schemes

printable version

Repair of the clutch master cylinder

Clutch Master Cylinder

1 - a hose coupling;
2 - a lock ring;
3 - pusher;
4 - piston;
5 - the piston stop;

6 - a spring;
7 - the stopper valve;
8 - a spring;
9 - the valve.

Dismantling

A warning

Clear the dismantled details in solvent and blow all details and channels the compressed air.

Not to damage the surface of the pusher and clutch master cylinder contacting the piston.

PERFORMANCE ORDER

	1. Push the plunger with pliers and remove the lock ring.
2. Remove the plunger, piston, piston stop, a spring, a valve stopper, and a valve spring.
A warning To keep the piston, cover with a cloth clutch master cylinder.
	3. Remove the piston by means of compressed air through the pipe insertion hole coupling.
	4. Lift the latch plunger stopper with a suitable tool.
	A warning Clear the dismantled details in solvent and blow all details and channels the compressed air. Do not mix different brands of hydraulic fluid to the clutch. Do not reuse drained clutch. Before assemblage grease with the specified liquid for coupling the piston and the cylinder bore diameter. Replace parts with new ones, for which there are appropriate instructions.

Assembly

PERFORMANCE ORDER

	1. Using a suitable tool, move the slider stopper piston.
A warning Do not damage the contact surface of the pusher piston.
	2. Push down on the push rod, install the snap ring.

« previos page
Clutch Master Cylinder

next page »
Clutch slave cylinder