REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Clarus (1995 issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Clarus
		Maintenance
		Engines FE DOHC and DOHC T8
		Greasing system
		Cooling
		The power supply system and release
		Fuel system
		Ignition system
		Coupling
			Technical data
			Check the fluid level
			Adjust the clutch pedal
			The clutch pedal
			Bleeding the hydraulic clutch
			Clutch Master Cylinder
			Repair of the clutch master cylinder
			Clutch slave cylinder
			Repair of the working cylinder of coupling
			Clutch disc
			Troubleshooting
		Manual transmission
		ACP G4A-EL
		AKP 50-40 LE
		Axes and power shafts
		Steering
		Wheels and tires
		Suspension
		Body
		The air conditioning system
		Electrical equipment
		Brakes
		Electric schemes

printable version

Repair of the working cylinder of coupling

Clutch slave cylinder

1 - a cover;
2 - pusher;
3 - piston assembly with a seal;
4 - spring;

5 - fitting cap;
6 - screw fitting;
7 - steel ball;
8 - the case of the working cylinder.

Dismantling

A warning

Clear the dismantled details in solvent and blow all details and channels the compressed air.

Before assembly, make sure all parts completely clean.

Before assemblage grease with the specified liquid for coupling the piston sealing ring (cuff) and diameter of the cylinder bore.

PERFORMANCE ORDER

1. Remove the cover of the working cylinder of coupling and a pusher.
	2. Remove the piston and the sealing ring (cuff), submitting compressed air through the hole to connect a hydraulic tube.
A warning Cover the opening of the working cylinder with a clean cloth to catch the expelled compressed air piston.

Assembly

PERFORMANCE ORDER

1. Install the spring, piston and cylinder press the clutch cover in the housing bore.

2. Place the plunger.

« previos page
Clutch slave cylinder

next page »
Clutch disc