REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 626 (from 1991 to 1998, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mazda
	626
		Instructions
		Maintenance
		Engines
		Heating and ventilation
			Introduction
			Specifications
			Thermostat
			Cooling Fans
			Radiator and expansion tank
			Water pump
			Coolant temperature
			Engine oil cooler (6-cylinder models)
			The electrical circuit of the motor blower
			Motor blower
			The control unit heater and the air-conditioned
			Radiator Heater
			Systems of air conditioning and heating
				The electrical circuit of the air conditioner compressor clutch
				Dehumidifier air conditioning system
				The compressor of the air conditioner
				Refrigerator air-conditioning system
				The evaporator air conditioning system
				A broad nozzle of an air conditioning
		Fuel system
		An exhaust system
		Transmissions
		Coupling and semiaxes
		The brake system
		Chassis
		Body
		Electrical
		Wiring
		Tips and Tricks

A broad nozzle of an air conditioning

The expansion nozzle

The expansion consists of a nozzle orifice plate and a few filters.

1. Long (inlet) end
2. O-ring
3. Short (exhaust) end

Withdrawal

PERFORMANCE ORDER

1. Lower pressure in system. Disconnect the negative battery terminal.
	2. In the four-cylinder models remove the pump system hydrostrengthening steering side (without disconnecting the tube) and place it to the side. Remove the coolant connection pipes leading from the condenser to the evaporator, using a special tool ..
3. When you disconnect the tube, you will see one end of the nozzle within the tube leading to the evaporator. Remove the nozzle from the tube.

Setting

Installation is spent upside-down removals.

next page »
Fuel system