REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 626 (from 1991 to 1998, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mazda
	626
		Instructions
		Maintenance
			Specifications
			Maintenance Schedule Ford Probe, Mazda 626 and MX-6
			Primary and secondary inspection
			Checking the oil level and liquids
			Checking the condition of tires and tire pressure
			Check the fluid level of steering hydrostrengthening
			Checking ATF
			Changing the engine oil and oil filter
			Checking of safety belts
			Inspection and replacement of wiper blades
			Checking, maintenance and charge the battery
			Check, adjustment of a tension and replacement drive a belt
			Check and replacement of hoses in the engine compartment
			Check the cooling system
			Shift of wheels
			Check the brake system
			Checking the oil in a mechanical transmission
			Replacement air filter
			Check and replacement of spark plugs
			Check and replacement of elements of system of ignition
			Check and replacement of the crankcase ventilation valve
			Check and adjustment of speed of idling (model till 1997 of century)
			Check and adjust the ignition timing (model till 1997 of century)
			Replacement of a cooling liquid and washing of system of cooling
			Replacing brake fluid
			Check steering and suspension
			Replacement ATF
			Replace manual transmission fluid
			Exhaust system check
			Check the power supply system
			Check and adjustment of backlashes of valves (release model 1998)
			Replacement of the fuel filter
		Engines
		Heating and ventilation
		Fuel system
		An exhaust system
		Transmissions
		Coupling and semiaxes
		The brake system
		Chassis
		Body
		Electrical
		Wiring
		Tips and Tricks

Check steering and suspension

Check shock absorbers

PERFORMANCE ORDER

	1. Check the shock absorbers, the car shaking up and down. Inspect absorbers for leaks in the arrow place. Check the attachment of shock absorbers.
	2. Examine the elements of steering and suspension for damage and deformation. Check the condition of the anthers tips of steering drafts (A) and the ball joint (B).
	3. Check the covers of the steering mechanism on presence of cracks and leakage of hydraulic fluid.
	4. Check bushing stabilizer bar.
	5. Take hold of the wheel and try to shake it. If the free play is too large, probably worn out ball joints of suspension and steering linkage. Replace them.

Check anther semiaxes

PERFORMANCE ORDER

	1. Spread the creases anther anthers fingers and check for cuts, cracks, or other damage.
2. Check for loose clamps. Replace anthers, if necessary.