REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz C-Class (from 1993 to 2000, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mercedes-Benz
	C-class
		Introduction
		Maintenance
			After 12 months or 15 000 km
			In addition, every 60 000 km
			Every 2 years
			Every 3-4 years
			Maintenance work
				The engine and exhaust system
				Box predach / final drive
				The front axle / steering
				Brakes / tires
				Body / interior lighting
					Replacing the filter nozzle pylezaderzhivayuschego
					Grease hood
					Checking of safety belts
					Grease hatch
			Car Care
			Starting from the auxiliary battery
			Towing
			Lifting the car
			Tools used for maintenance
		Engines
		Lubrication system
		Cooling
		Heating and ventilation
		Ignition system
		Fuel system
		Chassis
		Steering
		Brakes
		Body
		Electrical

printable version

Checking of safety belts

A warning

The noises that occur when the belt strap is wound, caused by the operation of the device. If you have any interfering noise can only be replaced belt. No way to eliminate the noise, do not use oil or grease. It must not break down mechanism for automatic drawing of seat belts, as this may give a pre-tensioned spring. There is a risk of injury!

PERFORMANCE ORDER

	1. Pull out the seat belt and check the belt on absence of uncombed fibers.
2. Damage can occur for example, due to the clamping belt or due to burning cigarettes. In this case, replace the belt. If you have rubbed the place with no signs of fraying of the fibers, the seat belt can not be replaced.
3. Check the hard driving on twisting belt, if necessary, remove the trim from the pillar.
4. If you no longer functioning mechanism for automatic retraction of seat belts, replace the belt. A warning Seat belt webbing Clean only with soap and water, do not use solvents or chemical detergents.

« previos page
Grease hood

next page »
Grease hatch