Removing and installing glow

Candles also as nozzle located under the intake manifold to be disassembled for their removal. For reversing of candles required ratchet head equipped with an extension cord.

After removing the intake manifold Loosen the nuts from the candles. The nuts are not removed because they are built into the tips of the wires. Then unscrew candles.

Before screwing spark hole in the settling chamber and a candle channel can be cleaned of soot scan the corresponding diameter. Use only regular sweep Mercedes. Apply grease to the groove sweep. Emphasis on the net prevents damage to the ball pin in the antechamber. Keep in mind that too deep scan is not allowed to enter.

Before screwing put on a carving candles graphite lubricant. Setting takes place in reverse sequence. Candles tighten to 20 Nm, wire lugs - 4 Nm.